Ricoh CL3500N - Aficio Color Laser Printer Software Manual Download Page 148

Page: 148 / 301

Making Printer Settings Using the Control Panel

148

• 100Mbps Half D.

• 100Mbps Full D.

❒

Default: Auto Select

❖

LAN Type

You can select Ethernet or IEEE 802.11b for LAN Type.
This menu appears only when the optional 802.11 interface unit is in-
stalled.

• Ethernet

• IEEE 802.11b

❒

Default: Ethernet

❖

IEEE 1394 Setup

You can make settings for IEEE 1394. This menu appears only when the op-
tional IEEE 1394 board is installed.

For details about IEEE 1394 Setup, see Setup Guide.

❖

DHCP

You can select

[

]

[

Off

]

to use TCP/IP with DHCP.

• On

• Off

❒

Default: On

❖

IP Address1394

You can specify the IP address for IEEE 1394 (IP over 1394).

❒

Default: 011.022.033.044

❒

When using both Ethernet and IP over 1394 simultaneously, do not
specify the IP address used for Ethernet.

❖

Subnet Mask1394

You can specify the subnet mask for IEEE 1394 (IP over 1394).

❒

Default: 000.000.000.000

❒

When using both Ethernet and IP over 1394 simultaneously, do not
specify the subnet mask used for Ethernet.

Summary of Contents for CL3500N - Aficio Color Laser Printer














































































































































































































































































































Search results

Summary of Contents for CL3500N - Aficio Color Laser Printer

Reviews:

Ricoh CL3500N - Aficio Color Laser Printer, Software Manual, Page: 148 / 301

Search results

Summary of Contents for CL3500N - Aficio Color Laser Printer

Reviews: