Preparing for Printing
23
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [
OK
].
The default interface language is English.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [
PostScript 3 Printer Driver
].
Add Printer Wizard starts.
E
Click [
next >
].
F
Click [
Local printer
], and then click [
next >
].
G
Click [
Add Port...
].
H
Click [
SmartDeviceMonitor
], and then click [
Next >
].
I
Click [
TCP/IP
], and then click [
Search
].
A list of printers using TCP/IP appears.
J
Select the printer you want to use, and then click [
OK
].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click
[
Specify Address
]
, and then enter the IP address
or host name of the printer.
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [
Next >
].
L
Change the printer name if you want, and then click [
Next >
].
Select the
[
Yes
]
check box to configure the printer as default.
M
Click [
Next >
].
N
Specify whether or not to print a test page, and then click [
Next>
].
O
Click [
Finish
].
The printer driver installation starts.
❒
A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.