manualshive.com logo in svg

Ricoh CL3500N - Aficio Color Laser Printer, Software Manual, Page: 43 / 301

Share
Download
Ricoh CL3500N - Aficio Color Laser Printer Software Manual Download Page 43

Preparing for Printing

43

G

Select the [

Printer Name

] check box to select the printer models you want

to use.

The printer name can be changed in the 

[

Change settings for 'Printer Name'

]

 box.

H

Double-click the printer name to display the printer settings.

The details shown in 

[

Comment:

]

, 

[

Driver:

]

, and 

[

Port:

]

 vary depending on the

operating system, printer model, and port.

I

Click [

Port:

], and then click [

Add

].

J

Click [

Network Printer

], and then click [

OK

].

K

Double-click the computer name you want to use as a print server in the
[

Browse for Printer

] window.

L

Select the printer you want to use, and then click [

OK

].

M

Check that the port of the selected printer is displayed in [

Port:

].

N

Configure the User Code as necessary.

For an RPCS printer driver, a User Code can be set after the printer driver in-
stallation. For information about User Code, see the printer driver Help.

O

Select the [

Default Printer

] check box to configure the printer as default.

P

Click [

Finish

].

The printer driver installation starts.

Q

Click [

Finish

] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer
to complete installation.

A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run. If
you still want to install the printer driver, use 

[

Add Printer

]

. See 

p.70 “If a

Message Appears during Installation”

.

Installing the PostScript 3 Printer Driver (Windows 95/98/Me)

❒

If you print from a print server connected to the printer using the SmartDevice-
Monitor port, the client cannot use Recovery Printing and Parallel Printing.

A

Quit all applications currently running.

B

Insert the CD-ROM into the CD-ROM drive.

Summary of Contents for CL3500N - Aficio Color Laser Printer














































































































































































































































































































Reviews:

No comments