Ricoh CL3500N - Aficio Color Laser Printer Software Manual Download Page 188

Page: 188 / 301

Monitoring and Configuring the Printer

188

❖

View settings

The following command displays the current domain name:

msh> domainname

❖

Interface domain configuration

msh> domainname “interface_name”

❖

Setting the Domain Name

msh> domainname “interface_name” name “domain name”

• A domain name can be entered using up to 63 alphanumeric characters.

• The Ethernet interface and IEEE 802.11b interface will have the same do-

main name.

• ip1394 can be specified only when the IEEE 1394 interface is installed.

• wlan can be specified only when the IEEE 802.11b interface is installed.

❖

Deleting the Domain Name

msh> domainname “interface_name” clear name

help

Use the “help” command to display the available command list and the proce-
dures for using those commands.

❖

Command list display

msh> help

❖

Display of procedure for using commands

msh> help “command_name”

hostname

Use the “hostname” command to change the printer name.

❖

View settings

msh> hostname

❖

Configuration

msh> hostname “interface_name ” “printer_name”

Interface

Interface set

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface

Summary of Contents for CL3500N - Aficio Color Laser Printer














































































































































































































































































































Search results

Summary of Contents for CL3500N - Aficio Color Laser Printer

Reviews:

Ricoh CL3500N - Aficio Color Laser Printer, Software Manual, Page: 188 / 301

Search results

Summary of Contents for CL3500N - Aficio Color Laser Printer

Reviews: