Ricoh BizWorks 406e Operation Manual Download Page 72

Page: 72 / 80

TECHNICAL REFERENCE

02:0010

000

Selecting 300 dpi or 600 dpi

Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.

Prt Help List

O K

3 User Param.

Press

until “3

User Param.” appears. The messages
change in the following order.

Press

and press

move the flashing block cursor until it
appears in the position shown in the
illustration to the right.

Press

to change the setting to 1 or

0, as desired.

Display

Heater status

02:0010 0000

600 dpi (default setting)

02:0010 1000

300 dpi

Note

The bits other than the one highlighted in the illustration are unrelated to this
setting.

g(GB)Chapter 07_p56-61

99.8.3, 0:51 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands