Ricoh BizWorks 406e Operation Manual Download Page 61

Page: 61 / 80

TROUBLESHOOTING

5. TROUBLE-

SHOOTING

Push back the blue paper release lever
located on the right.

Note

The lever releases pressure on the paper. If
you do not push it back, you could damage
the machine when removing paper.

Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.

Note

• If you are using the paper feed unit (op-

tion) and cannot clear the misfeed using this
procedure, use the procedure on page 48
instead.

• Sometimes toner may get on your hands.

Install the toner cassette into the ma-
chine.

Note

• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid

spilling the toner.

☛

Install the starter toner cassette, see page

Close the top unit.

Note

• If “Clear Paper” is still displayed after you clear

the jam, there may be paper jammed in another
part of the machine. Check all areas described
in this section.

Important!

If a paper misfeed occurs during a copy job, make sure to specify the desired copy
quantity again.

g(GB)Chapter 05_p39-50

99.8.3, 0:50 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands