Ricoh BizWorks 406e Operation Manual Download Page 31

Page: 31 / 80

GETTING ACQUAINTED

2. GETTING

ACQUAINTED

The machine has handhold at the loca-
tions shown in the illustration. Note that
the illustration shows the machine as
viewed from above.

Carefully lower the machine onto the
paper feed unit, making sure that the
dowels on the paper feed unit fit into
holes in the bottom of the machine
properly.

CAUTION

When lifting the machine, make sure your
hands are at the locations indicated by “

” in

the illustration. This protects against pinching
your fingers between the machine and paper
feed unit.

• This illustration shows the handhold lo-

cation on the right side of the machine.

• This is the handhold location on the left

side of the machine.

Note

After the above installation, attach the power cord to the machine, and plug the
other end into an outlet. Refer to page 8 for details.

g(GB)Chapter 02_p09-22

99.8.3, 0:49 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands