Ricoh BizWorks 406e Operation Manual Download Page 59

Page: 59 / 80

TROUBLESHOOTING

5. TROUBLE-

SHOOTING

Pressing down on the paper release le-
ver (blue) on the right side, pull out
the misfed paper.

Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.

Note

• If you are using the paper feed unit (op-

tion) and cannot clear the misfeed using this
procedure, use the procedure on page 48
instead.

• Sometimes toner may get on your hands.

Install the toner cassette into the ma-
chine.

Note

• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid

spilling the toner.

☛

Install the starter toner cassette, see page 2.

Close the top unit.

Note

• If “Clear Paper” is still displayed after you clear

the jam, there may be paper jammed in another
part of the machine. Check all areas described
in this section.

Important!

If a paper misfeed occurs during a copy job, be sure to specify the desired copy
quantity again.

g(GB)Chapter 05_p39-50

99.8.3, 0:50 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands