Ricoh BizWorks 406e Operation Manual Download Page 40

Page: 40 / 80

PRINTINGAND SCANNING

Using the Second Printer (Additional Printer)

Use the following procedure to switch between this machine and a second
printer when a second printer is connected.

Important!

If the second printer has a bi-directional mode, make sure you turn it off.

Note

☛

Connecting a second printer, see page 15.

To print to the second printer

Press

. The Second Printer

indicator lights.

Important!

Whenever you change printers, be sure to also
change to the appropriate printer driver on
your computer.

Note

While the Second Printer Indicator is lit, print
data from your computer passes through the
machine to the second printer.

Perform the required print operation
with the application you are using.

g(GB)Chapter 03_p23-26

99.8.3, 0:49 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands