Ricoh BizWorks 406e Operation Manual Download Page 29

Page: 29 / 80

GETTING ACQUAINTED

2. GETTING

ACQUAINTED

Connecting a Second Printer (Additional
Printer)

The machine features a port that you can use to connect your current printer
as a second printer (additional printer). Once you do, you have a selection
of this machine or the second printer at the touch of

key.

Note

Make sure that the power of your computer is turned off before making the con-
nection.

To connect to a second printer

Turn off both the machine and your sec-
ond printer.

Connect one end of a parallel interface
cable to your second printer.

Connect the other end of the cable to
the second printer port, securing it in
place with the screws.

Note

• It requires a standard 36-pin parallel cable

compliant with IEEE 1284.

• Refer to page 26 for details on using the sec-

ond printer.

g(GB)Chapter 02_p09-22

99.8.3, 0:49 PM

Summary of Contents for BizWorks 406e

















































































Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands

Ricoh BizWorks 406e, Operation Manual

Search results

Summary of Contents for BizWorks 406e

Reviews:

Related manuals for BizWorks 406e

Brands by name

Popular brands