PROGRAM DOWNLOAD
B234/B235/B236/D101/D102/D103
4-2
SM
4.1.3
DOWNLOAD ERROR CODES
Display
Details
Recovery
Controller ROM update error 1
01
Reboot after
card insert E01
↕
Module ID
Card No. xx/xx
When the update break data is stored in
NVRAM, the break module information and
the decompression module capable of
writing do not match.
•
Use the correct card
Controller ROM update error 2.
02
Download Error E02
Power off/on
Error occurs during ROM update program
initialization.
•
Cycle the machine
off/on to rewrite
Controller ROM update error 3
03
Download Error E03
Power off/on
The ROM for the write operation does not
exist.
•
Cycle the machine
off/on
•
Install the missing ROM
DIMM
Controller ROM update error 4
04
Download Error E04
Power off/on
GZIP data confirmation fails. (CRC value
check)
•
Cycle the machine
off/on
•
Set DIP SW 1 to ON
and retry
•
Replace RAM DIMM
•
Replace controller board
Controller ROM update error 5
05
Download Error E05
Power off/on
Error occurs when writing to the device.
•
Cycle the machine
off/on
•
Set DIP SW 1 to ON
and retry
•
Replace RAM DIMM
•
Replace controller board
Controller ROM update error 6
06
Download Error E06
Power off/on
CPU clock error.
•
Turn the machine power
off/on.
•
Set controller DIPSW-1
to ON to force the
machine to write to
ROM.
•
If you cannot force the
machine to write,
replace the controller
board.
Controller ROM update error 7
19
Download Error E19
Power off/on
Schedule data is unclear.
•
Software defective
System error 1 (+SC991)
20
Down Error E20
Power Off/On
The physical address cannot be mapped.
Software/hardware is defective
•
Cycle the machine
off/on and re-try
•
Replace controller board
System error 2 (+SC991)
21
Download Error E21
Power Off/On
There is not sufficient memory to
download.
•
Cycle the machine
off/on and re-try.
•
Replace RAM
•
Replace the controller
board
