Ricoh AP305, Operating Instructions Manual

Page: 123 / 156

Replacing Consumables
93
6
R
WARNING:
R
CAUTION:
Note
❒
Before removing the waste toner
bottle from the printer, spread pa-
per or some other material around
the area you are working to keep
toner from making floor dirty.
A
Turn on the printer’s power
switch.
B
Open the front cover by pushing
the front cover release button.
C
Hold the inset grips (green part)
of the photoconductor unit, and
pull the top side of the photocon-
ductor unit forward.
D
Replace the waste toner bottle .
A
Grasping the waste toner bot-
tle by its green tabs, remove it
from the printer.
B
Insert a new waste toner bottle
at the rear of the photoconduc-
tor unit.
Insert a new waste toner bottle
completely. Otherwise, print
problem may occur.
•
Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
• Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
• If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
• When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E
TFWX330E
TFWX340E