Ricoh AP305 Operating Instructions Manual Download Page 119

Page: 119 / 156

Replacing Consumables

Open the front cover by pushing
the front cover release button.

Loosen the screws that hold the
photoconductor unit in the print-
er with the screw driver in the
new photoconductor unit's box.

The screws cannot be completely
removed from the photoconductor
unit.

Hold the inset grips (green part)
of the photoconductor unit, and
pull the top side of the photocon-
ductor unit forward.

Hold the inset grips (green part)
of the photoconductor unit, re-
move the photoconductor unit
from the printer, and place it care-
fully inside the new photocon-
ductor unit's box.

Important

❒

To prevent accidental spilling of
toner, do not shake, rotate, drop
or hold the toner cartridge up-
side down.

TFWX080E

TFWX400E

TFWX250E

TYWX290E

TFWX520E

Summary of Contents for AP305





























































































































































Search results

Summary of Contents for AP305

Reviews:

Related manuals for AP305

Brands by name

Popular brands

Ricoh AP305, Operating Instructions Manual

Search results

Summary of Contents for AP305

Reviews:

Related manuals for AP305

Brands by name

Popular brands