Ricoh AficioSP C410DN Page 184 Hardware Manual Download

Page: 184 / 204

Removing Misfed Paper

172

When the Paper Misfeed Message Appears
(Cover A)

• If the “Press A to open cover and remove paper.” message appears:

A paper misfeed occurs in the paper feeding. Open the front cover (A) to re-
move the misfed paper.

CAUTION:

Important

❒

Remove the paper from the bypass tray before opening the front cover.

❒

If a misfeed occurs when using the bypass tray, open the front cover, and then
remove the misfed paper.

Carefully open the printer's front cover (A) of by pulling left and right side
levers.

•

The inside of the machine becomes very hot. Do not touch the parts with a
“

” label (means hot surface). Touching a part with a “

” label (means hot

surface) could result in a burn.

•

When pulling the paper tray out, be careful not to pull it strongly. If you do,
the tray might fall and cause an injury.

AQC018S

Summary of Contents for AficioSP C410DN












































































































































































































Search results

Summary of Contents for AficioSP C410DN

Reviews:

Related manuals for AficioSP C410DN

Brands by name

Popular brands

Ricoh AficioSP C410DN, Hardware Manual

Search results

Summary of Contents for AficioSP C410DN

Reviews:

Related manuals for AficioSP C410DN

Brands by name

Popular brands