Ricoh AficioSP C410DN Hardware Manual Download Page 167

Page: 167 / 204

155

9. Troubleshooting

Error & Status Messages on the Control
Panel

This section explains what the messages that appear on the control panel mean
and what to do when a particular message appears.

❖

Status Messages (in alphabetical order)

Message

Status

Calibrating...

The printer is calibrating the color. Wait a while.

Energy Saver

The printer is in the Energy Saver mode. Press
any keys to recover to the normal mode.

Hex Dump Mode

In the Hex Dump mode, the printer receives
data in hexadecimal format. Turn off the print-
er after printing, and then turn back on.

Job Suspended

All jobs are suspended. Turn off the printer,
and turn it on again to recover.

Loading toner

The printer is loading toner. Wait a while.

Offline

The printer is offline. To start printing, switch
the printer online by pressing the Online Key.

Please wait.

This message may appear for a few seconds. It
means the printer is initializing, replenishing
toner, or executing maintenance operations.
Wait a while.

Printing...

The printer is printing. Wait a while.

Ready

This is the default ready message. The printer
is ready for use. No action is required.

Resetting Job...

The printer is resetting jobs. Wait a while.

Setting change...

The printer is setting changing. Wait a while.

Waiting...

The printer is waiting for the next data to print.
Wait a while.

Summary of Contents for AficioSP C410DN












































































































































































































Search results

Summary of Contents for AficioSP C410DN

Reviews:

Ricoh AficioSP C410DN, Hardware Manual, Page: 167 / 204

Search results

Summary of Contents for AficioSP C410DN

Reviews: