Ricoh Aficio SP C400DN User Manual Download Page 480

Page: 480 / 608

Monitoring and Configuring the Printer

256

Near Replacing: Develop. Unit K

Prepare the new development unit (black).

Near Replacing: Develop. Unit M

Prepare the new development unit (magenta).

Near Replacing: Develop. Unit Y

Prepare the new development unit (yellow).

Near Replacing: Fusing Unit

Prepare the new fusing unit.

Near Replacing: Maintenance Kit

Prepare the new maintenance kit.

Near Replacing: Transfer Unit

Prepare the new transfer unit.

Nearly Full: Waste Toner

Waste toner bottle is nearly full.

Need more Staples

Stapler has almost run out of staples.

No Paper: Interposer Tray

There is no paper in interposer unit.

No Paper: Selected Tray

There is no paper in specified tray.

No Paper: Tray 1

There is no paper in tray 1.

No Paper: Tray 2

There is no paper in tray 2.

No Paper: Tray 3

There is no paper in tray 3.

Not Detected: B2 Lever

B2 lever is not correctly set.

Not Detected: Black Toner

Black toner is not correctly set.

Not Detected: Cyan Toner

Cyan toner is not correctly set.

Not Detected: Develop. Unit (C)

The development unit (cyan) is not correctly set.

Not Detected: Develop. Unit (K)

The development unit (black) is not correctly set.

Not Detected: Develop. Unit (M)

The development unit (magenta) is not correctly set.

Not Detected: Develop. Unit (Y)

The development unit (yellow) is not correctly set.

Not Detected: Duplex Feed Unit

The duplex feed unit is not correctly set.

Not Detected: Finisher

Finisher is not correctly set.

Not Detected: Fusing Unit

The fusing unit is not correctly set.

Not Detected: Input Tray

The paper feed tray is not correctly set.

Not Detected: Interposer

Interposer unit is not correctly set.

Not Detected: Magenta Toner

Magenta toner is not correctly set.

Not Detected: PCU (C)

The photoconductor unit (cyan) is not correctly set.

Not Detected: PCU (K)

The photoconductor unit (black) is not correctly set.

Not Detected: PCU (M)

The photoconductor unit (magenta) is not correctly set.

Not Detected: PCU (Y)

The photoconductor unit (yellow) is not correctly set.

Not Detected: Transfer Unit

The transfer unit is not correctly set.

Not Detected: Tray 1

Tray 1 is not correctly set.

Not Detected: Tray 2

Tray 2 is not correctly set.

Not Detected: Tray 3

Tray 3 is not correctly set.

Not Detected: WasteToner Bottle

Waste toner bottle is not correctly set.

Messages

Description

Summary of Contents for Aficio SP C400DN






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio SP C400DN

Reviews:

Related manuals for Aficio SP C400DN

Brands by name

Popular brands

Ricoh Aficio SP C400DN, User Manual

Search results

Summary of Contents for Aficio SP C400DN

Reviews:

Related manuals for Aficio SP C400DN

Brands by name

Popular brands