Ricoh Aficio MP 1600L2, Field Service Manual

Page: 233 / 264

1911 1
[0 = Disabled / 1= Enabled
The program dedicated to envelope printing runs when you enable this program (SP 1911
1) and you select "Thick Paper" as the paper type of the by-pass tray (System Settings >
Tray Paper Settings > Paper Type: Bypass Tray).
SP2-XXX (Drum)
2001* Charge Roller Bias Adjustment
2001 1
Printing [–2100 to –1500 / –1700 / 1 V/step]
Adjusts the voltage applied to the charge roller when printing. The actually applied voltage
changes automatically as charge roller voltage correction is carried out. The value you set
here becomes the base value on which this correction is carried out.
2001 2
ID sensor pattern [0 to 400 / 300 / 1 V/step]
Adjusts the voltage applied to the charge roller when generating the Vsdp ID sensor pattern
(as part of charge roller voltage correction). The actual charge-roller voltage is obtained
by adding this value to the value of SP 2001 1.
2101* Erase Margin Adjustment
2101 1
Leading edge
[0.0 to 9.0 / 2.0 / 0.1 mm/step] ( Copy Adjustments
Printing/Scanning)
Specification: 2 ± 1.5 mm
Adjusts the leading edge erase margin.
2101 2
Trailing
[0.0 to 9.0 / 3.0 / 0.1 mm/step] ( Copy Adjustments
Printing/Scanning)
Specification: 2 +2.5/–1.5 mm
Adjusts the trailing edge erase margin. The rear trailing edge is this value plus 1.2 mm.
2101 3
Left side
[0.0 to 9.0 / 2.0 / 0.1 mm/step] ( Copy Adjustments
Printing/Scanning)
Specification: 2 ± 1.5 mm
Adjusts the left edge erase margin. The rear left edge is this value plus 0.3 mm.
SP Mode Tables
25
3