Ricoh Aficio 3232C, Facsimile Reference Manual

Page: 57 / 108

Reception
49
2
Reception
There are two ways you can set up
your machine to handle incoming
calls:
• Manual Reception (external tele-
phone required)
• Auto Reception
You can change the reception mode
only if a standard G3 line is used.
You cannot change the reception
mode when a line other than the stan-
dard G3 line (G3-2) is used.
❖ ❖ ❖ ❖
Manual Reception
When a telephone call comes in,
the machine rings. If the call is a fax
message, you must switch manual-
ly to facsimile mode.
❖ ❖ ❖ ❖
Auto Reception
When a telephone call comes in,
the machine automatically re-
ceives it as a fax message. Use this
setting on a dedicated fax line.
Note
❒
The external telephone is re-
quired to use this machine as a
telephone.
Switching the Reception Mode
You can switch reception modes us-
ing the Reception Settings menu (un-
der Facsimile Features). See p.145
“Reception Settings”,
Facsimile Refer-
ence <Advanced Features> .
If you program a Quick Operation
key with Switch Reception Mode, you
can switch reception mode quickly.
Preparation
You can only use this function af-
ter programming a Quick Opera-
tion key as the reception mode
switch with
[ Quick Operation Key 1 ] ,
[ Quick Operation Key 2 ] , or [ Quick Op-
eration Key 3 ] under Gen. Settings/
Adjust. See p.142 “General Set-
tings/Adjustment”,
Facsimile Ref-
erence <Advanced Features> .
AAAA
Press the [ Switch RX Mode ] Quick
Operation key.
BBBB
Select the reception mode, and
then press
[ OK ] .
The standby display appears.
Note
❒
To cancel the selection, press
[ Cancel ]
.
ThemisC1_Fax_EN-F_FM.book Page 49 Tuesday, January 11, 2005 4:51 PM