Ricoh Aficio 3232C, Facsimile Reference Manual

Page: 14 / 108

Getting Started
6
1
7.
{{{{
Check Modes
}}}}
key
Press before pressing the
{{{{
Start
}}}}
key to
check the settings selected for the fax
about to be sent. See p.20 “Checking the
transmission settings”
8.
{{{{
Program
}}}}
key
Enables you to program frequently used
settin gs and recall previously pro-
gramm ed settin gs. S ee p.127 “Pro-
grams”,
Facsimile Reference <Advanced
Features> .
9.
{{{{
Clear Modes
}}}}
key
Press to cancel the current settings.
10.
On indicator
This indicator lights when the operation
switch is turned on.
Important
❒
Do not turn off the main power
switch while the On indicator stays
lighted or is blinking. Neglecting
this may damage the hard disk.
Note
❒
If the main power switch is on even
when the On indicator is off, the ma-
chine will receive a fax message.
11.
Main Power indicator
This indicator lights when the main pow-
er switch is turned on. See “Turning On
the Power”,
General Settings Guide .
12.
Operation switch
Press to turn the power on (the On indi-
cator lights). To turn the power off, press
this switch again (the On indicator goes
off). See p.196 “Turning Off the Main
Power / When a Power Failure Occurs”,
Facsimile Reference <Advanced Features> .
Note
❒
The Operation switch does not func-
tion when the
[ User Tools / Counter / In-
quiry ] display is shown.
13.
Function status indicators
• When lit green, the corresponding
function is active.
• When lit red, the corresponding func-
tion is interrupted. Press the respec-
t i v e k e y a n d t h e n f o l l o w t h e
instructions that appear on the screen.
14.
Data In indicator
Lights when there is data remaining to be
printed.
Blinks when the LAN-Fax data is being
received.
15.
Function keys
Press the
{{{{
Copy
}}}}
,
{{{{
Document Server
}}}}
,
{{{{
Fac-
simile
}}}}
,
{{{{
Printer
}}}}
, or
{{{{
Scanner
}}}}
key to acti-
vate the respective function. The display
content changes accordingly.
The indicator for the selected function
lights up.
16. {{{{
Start Manual RX
}}}}
key
Press when Manual Reception is set. See
p.50 “Receiving a Fax in Manual Recep-
tion Mode”.
17.
{{{{
On Hook Dial
}}}}
key
Press when you want to dial while hear-
ing tone from the internal speaker. See
p.56 “On Hook Dial”,
Facsimile Reference
<Advanced Features> .
18.
{{{{
Pause/Redial
}}}}
key
Pause:
Inserts a pause when you are dialing or
storing a fax number. A pause cannot be
inserted as the first digit. See p.34
“Pause”.
Redial:
Press to redial one of the last ten num-
bers. See p.47 “Redial”,
Facsimile Refer-
ence <Advanced Features> .
19.
{{{{
Tone
}}}}
key
Press to send tonal signals down a pulse
dialing line. See p.35 “Tone”.
20.
Number keys
Use to dial fax numbers, or enter the
number of copies.
ThemisC1_Fax_EN-F_FM.book Page 6 Tuesday, January 11, 2005 4:51 PM