Ricoh Aficio 3232C, Facsimile Reference Manual

Page: 28 / 108

Faxing
20
2
FFFF
Specify a destination.
Note
❒
Pressing switches the des-
tination list between fax num-
ber, e-mail address, and IP-Fax
number.
❒
If you want to specify another
destination, repeat steps
E
and
F
.
GGGG
Press the
{{{{
Start
}}}}
key.
Note
❒
Do not lift the ADF during scan-
ning.
After scanning, the standby dis-
play appears.
-
- -
-
Sending originals using the
exposure glass
A Make sure that Memory TX is se-
lected.
B Place the first page of your original
face down on the exposure glass.
C
Dial a destination.
D Make the scan settings you re-
quire.
E Press the
{{{{
Start
}}}}
key.
The machine starts scanning.
F Place the next original on the expo-
sure glass within 60 seconds after
the machine has finished scanning
the first original.
G Repeat steps
D
to
F
for all origi-
nals.
H Press [
# # # #
] after pressing the
{{{{
Start
}}}}
key to send the final original.
-
- -
-
Checking the transmission
settings
You can check the transmission set-
tings (e.g. destination and transmis-
sion mode) on the display.
A Press the
{{{{
Check Modes
}}}}
key.
The following display appears.
Note
❒
Pressing switches the des-
tination list between fax num-
ber, e-mail address, and IP-Fax
number.
ZLBS040N
ThemisC1_Fax_EN-F_FM.book Page 20 Tuesday, January 11, 2005 4:51 PM