Ricoh Aficio 2105, Operating Instructions Manual, Page: 56 / 114

Sending Stored Scan Data by E-mail
50
4
C
For a reception confirmation e-
mail, press
[ Return Receipt ] .
Note
❒
When
[ Return Receipt ]
is se-
lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the setting in
[ Return Receipt ]
becomes in-
valid.
D
Press
[ OK ]
.
Using a short ID number to
specify a sender name
A
Press [ Attach Sender's Name ] .
B
Use the number keys to enter
the five-digit short ID number
that has been assigned to a
sender.
If the entered number is less
than five digits long, press the
{{{{
#
}}}}
key after the last number.
Example: To enter 00006
Press the
{{{{
6
}}}}
key, and then
press the
{{{{
#
}}}}
key.
Note
❒
If a password has been set, a
screen for entering the pass-
word appears after selecting
the sender. Enter the pass-
word, and then press
[ OK ] .
After verification of the pass-
word, the sender name is dis-
played.
C
For a reception confirmation e-
mail, press
[ Return Receipt ] .