Ricoh Aficio 2105, Operating Instructions Manual, Page: 44 / 114

Setting Originals
38
3
Note
❒
When the last page of two-
sided originals is blank, se-
lect
[ 1 Side ] to skip that side
and finish scanning, or select
[ 2 Sides ] to scan that side as a
blank page.
❒
If [ 1 Side ] is selected for the
last page when scanning
originals in several batches,
the maximum number of
pages per file may decrease
depending on the number of
batches set.
❒
If
[ 1 Side ]
is selected for the
last page, the image size
might become larger than
original and may exceed the
maximum e-mail size possi-
ble. In this case, change the
settings of
[ Max. E-mail Size ]
in
scanner settings. See p.11
“Initial Scanner Setup”.
❒
When scanning originals on
the exposure glass with the
[ 2
Side Orig. ] setting, set [ 1 Side ]
for the last original.
C
Press [ OK ] .
Original feed type selection
A
Press [ Original Feed Type ] .
B
When scanning a large number
of originals using the ADF by
dividing the originals and
scanning them individually or
in batches, check that
[ SADF ] or
[ Batch ]
is selected.
Note
❒
Select
[ SADF ]
for adding orig-
inals one by one, or select
[ Batch ]
for adding the origi-
nals in batches.
❒
Select whether
[ SADF ]
or
[ Batch ] is displayed using the
initial scanner setting
[ Origi-
nal Feed Type Priority ] .
C
Press
[ Mix 1&2 Sided ]
to beable
to switch between [ 1 Side Orig. ]
and
[ 2 Side Orig. ]
while scan-
ning originals.
Note
❒
When either [ SADF ] or [ Batch ]
is not selected, [ Mix 1&2 Sided ]
cannot be selected.
❒
When [ Mix 1&2 Sided ] is select-
ed, the scanning mode can be
switched by selecting
[ 1 Side
Orig. ] or [ 2 Side Orig. ] while
the countdown until origi-
nals are no longer accepted is
progressing. You cannot
switch to or from
[ 1 Side Orig. ]
and [ 2 Side Orig. ] until the
scanning of one original is
completed.
❒
One-sided and two-sided
originals are usually output
to different trays but when
[ Mix 1&2 Sided ] is selected, all
originals are output to the
same tray reversed (back
side facing up) regardless of
whether they are one-sided
o r t w o - s i d e d o r i g i n a l s .
Avoid using originals that
are unsuitable for the ADF
such as thick paper.
D
Press [ OK ] .
Top to top
original:
Top to bot-
tom original:
R S
R S
R
S
S
R