Ricoh Aficio 2105, Operating Instructions Manual, Page: 103 / 114

Troubleshooting
97
8
No HDD is available for this function. Cannot store. Set
original and select the TWAIN settings from the PC. Files can be scanned with TWAIN by
switching to the network TWAIN
scanner function.
Out of paper in Tray 1. Load paper in the tray indicated.
Out of paper. Load one of the following paper sizes.
A3
S
, B4 JIS
S
, A4
S
, A4
R
...
Load paper of the sizes listed in the
message.
Scanner is currently in use by another function. Switch
to another function to confirm the status.
Note
❒
These messages appear alternately.
The machine is using another func-
tion such as copying. Retry scanning
after the operation with the other
function is completed.
No sender's name has been specified. It is necessary to
specify sender's name when sending E-mails. No send-
er's name has been specified. Specify sender's name.
Note
❒
These messages appear alternately.
A sender's name should be specified
before sending e-mail. Send e-mail
after specifying the sender's name.
Sending the data has been cancelled. The selected file(s)
contain some deleted file(s). Try again after checking the
stored file(s). After the files were selected, some
files were deleted with DeskTop-
Binder V2 Lite/Professional. Per-
form the selection process again.
Sending the data has failed due to insufficient memory
in the delivery server. There is not enough free space on the
hard disk of the delivery server. Free
up the required amount.
Sending the data has failed due to insufficient memory
in the SMTP server. There is not enough free space on the
hard disk of the SMTP server. Free
up the required amount.
Sending the data to the delivery server has failed. Check
[Scanned File Status] to confirm the result. While a file was being sent to the de-
livery server, a network error oc-
curred and the file could not be sent
correctly. Try the operation once
more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.68 “Checking the Status of De-
livery”.
Message Causes and solutions