manualshive.com logo in svg

Ricoh Aficio 2105, Operating Instructions Manual, Page: 102 / 114

Share
Download
Ricoh Aficio 2105 Operating Instructions Manual Download Page 102

Appendix

96

8

Exceeded max. number of pages per file. Do you want to 
store the scanned pages as 1 file?

The maximum number of pages per 
file is 1,000. Specify whether to use 
the data or not. Scan the pages that 
were not scanned and store them as 
a new file.

Exceeded max. number of search results which can be 
displayed.

Search again after changing the 
search conditions.

Exceeded max. number of standby files. Try again after 
the current file is sent.

There are 50 files waiting in the send-
ing queue for the delivery server. 
Wait until files have been sent.

Exceeded max. page capacity per file. The current 
scanned data will be sent.

Because the number of pages has 
reached the maximum number that 
can be sent, the data up to this point 
is sent. Scan the remaining pages af-
ter transmission.

Memory is full. Cannot scan.

Because of insufficient hard disk 
space, the first page could not be 
scanned. Try one of the following 
measures:

• Wait for a while, and then retry 

the scan operation.

• Reduce the scan area or scanning 

resolution.

• Delete unneeded stored files.

Memory is full. Delete unnecessary stored files.

Note

❒

These messages appear alternately.

There is not enough free hard disk 
space. Delete unneeded files.

Memory is full. Scanning has been cancelled. Do you 
want to store the current scanned data?

Note

❒

These messages appear alternately.

Because there is not enough free 
hard disk space in the machine for 
storing into the Document Server, 
only some of the pages could be 
scanned. Specify whether to use the 
data or not.

Memory is full. Scanning has been cancelled. Press 
[Send] to send the current scanned data, or press [Cancel 
& Delete].

• Because there is not enough free 

hard disk space in the machine 
for delivery or e-mail, only some 
of the pages could be scanned. 
Specify whether or not to deliver 
the data.

• Because there is not enough free 

hard disk space in the machine 
for delivering or sending by e-
mail while storing into the Docu-
ment Server, only some of the 
pages could be scanned. Specify 
whether to use the data or not.

Message

Causes and solutions

Summary of Contents for Aficio 2105



















































































































Reviews:

No comments