Beijing RichAuto S&T Co., Ltd.
38
starts to process when the system finished the checking. The G code checking is system smart
check mode, press “
” to stop the code checking and directly access to automatic
processing.
System will remember the checking result only when it is a complete and correct checking. And
the system will not check the same file again after complete and correct checking.
During the processing, system screen scrolling display real-time processing speed, operation time,
and current line number. Switching those options by pressing “
”.
5.5 Processing operations
5.5.1 Speed ratio & spindle state adjusting
1) Speed ratio adjusting
During processing, press “
” adjust the speed ratio. The speed ratio increase/decrease 0.1
each press on “
”. Speed scale (speed ratio): max. 1.0; min.0.1, speed values are also
changed accordingly except for the time. Current processing speed = work speed * speed scale
2) Adjust spindle state
If user has set multistep speed, the DSP handle can change the multistep speed
during processing. Press “
” to change spindle shift from S1 to S8.
5.5.2 Suspend processing & position adjustment
Press “
”pause processing. The top right corner of screen will change from “MAUN” to
