Beijing RichAuto S&T Co., Ltd.
36
Note
: The system cannot set workpiece origin under machine coordinate system. User should
switch to work coordinate first, and then set workpiece origin.
5.4 Auto processing operation
Auto processing refers to the system runs according to the instruction of the file in U disk or
inner storage space, it also called “file processing”. Before auto processing, user must set the
machine tool parameters and all of the system parameters correctly.
Auto processing steps could refer to the following text.
5.4.1 Set workpiece origin
The origin coordinates of X, Y and Z axis in the processing program is workpiece origin.
Before processing, we should pay attention to this position as well as
the real position. Operation is as follow:
Move X, Y and Z to the position which will start to process the file on workpiece. Afterwards,
press zero clearing “
” can set the workpiece origin of X, Y axis. Press zero clearing
“
” can set the origin of Z axis. It should be noted that if user have already used the
automatically tool setting function which combination keys are “
” + “
” will no
need to press “
”.
