Beijing RichAuto S&T Co., Ltd.
33
change the running speed and set the grid (step distance) in manual mode. System will enter
Manual Operation state after returned home, and the screen displays,
Manual control state initial interface:
Coordinate Number Operation status
Axis Spindle status
Speed Mode
Manual mode
5.3.1 Manual speed switching and adjustment
1) Speed mode switching
There are 2 speed modes: High speed and low speed. We can switch speed mode by pressing
“
” key. The speed mode status show on screen determines the actual manual moving
speed.
2)
Speed adjusting
In manual mode, press “
” enter into the current speed mode settings. For instance,
suppose the current speed mode is LOW (screen shows ‘L’), the screen displays:
The cursor is on “X SLOW”, Press “
” to the one needs to be modified, and press
“
” then input new value, and next press “
” to confirm; Press “
” to exit
the settings. If the input value is wrong, press “
” delete the last number and then input
new numbers.
To ensure the accuracy of processing and debugging, the system introduces the concept of ‘grid’
1 X 0.000
MAUN
1 Y
0.000
F 2
1 Z
0.000
L N1
Continue
Manual Param
X SLOW
1200.000
Y SLOW
1200.000
Z SLOW
1200.000
Slow Grid
0.100
