Installation
© Rice Lake Weighing Systems
●
All Rights Reserved
3
2.0
Installation
This section describes procedures for connecting power, load cells, digital I/O and data communication cables to a 680 indicator.
An assembly drawing and parts list are included for the service technician.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to state and
local regulations.
Risque d’explosion si la batterie est remplacée par un type incorrect. Mattre au rebus les batteries usagées
selon les règlements d'état et locaux.
Use anti-static protection for grounding and to protect components from electrostatic discharge (ESD) when working inside the
680 enclosure.
Procedures requiring work inside the 680 must be performed by qualified service personnel only.
The electric receptacle to the 680 must be easily accessible.
2.1 Unpacking
Immediately after unpacking, visually inspect the 680 to ensure all components are included and undamaged. The shipping
carton contains the indicator, this manual and a parts kit (
). If parts were damaged in shipment, notify
Rice Lake Weighing Systems and the shipper immediately.
2.1.1 Product Dimensions
Figure 2-1. Product Diagram
Risk of electrical shock.
Risque de choc.
Disconnect power before servicing.
Débranchez l’alimentation avant l’entretien.
A
B
C
D
E
F
10.02'' (254.5 mm) 11.58'' (294.1 mm) 6.00'' (152.4 mm) 8.57'' (217.7 mm) 3.40'' (86.4 mm) 4.05'' (102.9 mm)
Table 2-1. Product Dimensions
WARNING
AVERTISSEMENT
CAUTION
ATTENTION
A
C
F
E
B
D
