4.3.1- Attach the flexible tube
Loosen and insert a hose clamp (23) to the extremity of the flexible tube (5)
Fig.2: Connect the flexible tube end (B) to the fan’s outlet tube (A).
Fig.3: Tighten the hose clamp (23) with a screwdriver.
4.3.2- Attach the operating tube
Loosen and insert a hose clamp (23) to the extremity of the flexible tube (5)
Fig.4: Connect the operating tube end (D) into the extremity (C) of the flexible tube (5).
Fig.5: Tighten the hose clamp (23) with a screwdriver.
Ensure that the screw of the hose clamp is positioned away from the operator’s hand or wrist to avoid
any discomfort or injury.
Fig.6: Lay the throttle cable (11) as straight as possible along the flexible tube (5) and attach it with
the linkage clips (E).
4.3.3- Attach the intermediate tube and the nozzles
Insert intermediate tube (3) into the operating tube (4) and rotate clockwise to lock them.
Insert the nozzle (1) or (2) into the intermediate tube (3) and rotate clockwise to lock them.
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
4.4- Adjusting the harness and control handle
Place blower on your back slipping your arms through the shoulder straps.
Adjust shoulder straps by pulling the tabs until you find a comfortable working
position.
Fig.8: adjust the control handle (7) to desired and comfortable working position.
Fig.8
