The operator should closely monitor the condition of their hands and fingers, and if any of the
symptoms appear, seek medical advice immediately.
3.6- Symbols
3.6.1- Symbols carved on machine
WARNING - For safe operation and maintenance, symbols are carved in relief
on the machine.
According to these indications, please be careful not to make any mistake.
Setting the switch to the “O” position, the engine stops immediately.
Position: Front at the top of the rear handle
The port to refuel “MIX GASOLINE”
Position: Fuel cap
The choke lever has 3 positions:
• First-stage position – FULL CHOKE - starting mode when the engine is
warm.
• Second-stage position – PARTIAL CHOKE - starting mode when the engine
is cold.
Third-stage position – RUN – engine running position
Upper-right of the air cleaner cover
3.6.2- Symbols labeled on machine
Read the instructions manual before operating the machine
Wear eye protection.
Wear ear protection.
The machine may exceed 85 dB(A) at the workplace; in this case, noise
protection measures need to be taken to protect the user.
Wear protective gloves and shoes with non-slippery sole
Tie your hair up to avoid it being caught in the fan or a ventilator.
Warning! Keep hair away from the openings and moving parts while tool is
running.
Avoid wearing loose clothes when working next to a fan or ventilator
Warning! Keep your clothes away from the openings and moving parts while
tool is running.
Warning! Do not operate without tubes being firmly attached in place.
Do not touch the fans while the machine is still running.
Warning! Keep hands and body parts away from the openings and moving
parts while tool is running.
Keep all parts of your body away from moving parts, and the blower opening
