90
screen if you enabled this function.
Alarm upload: System can upload the alarm signal to the network (including alarm
center and the WEB) if you enabled current function. System only uploads the alarm
channel status. You can go to the WEB and then go to the Alarm interface to set
alarm event and alarm operation. Please go to the Network interface to set alarm
center information.
Send email: System can send out the alarm signal via the email to alert you when
alarm occurs. Once you enable the snap function, system can also send out an
image as the attachment. Please go to the Main Menu->Setting->Network->Email
interface to enable email function.
Record channel: you can select proper channel to record alarm video when an
alarm occurs.
Note
Make sure you have enabled alarm record function. Refer to chapter 4.1.7
Schedule for detailed information.
Make sure you have enabled auto record. Refer to chapter 4.1.6 Record for
detailed information.
Snapshot: You can enable this function to snapshot image when an alarm occurs.
Note
Make sure you have enabled trigger (event) snapshot. Refer to chapter
4.3.1.2.3 Snapshot for detailed information.
Make sure you have enabled auto snapshot. Refer to chapter 4.1.6 Record
control for detailed information.
Log: Check the box here, system can record alarm event log.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm
occurs.
Figure 4-77
