52
Figure 4-28
Step 3 Check the box to enable tour function.
Interval: Input proper interval value here. The value ranges from 5-120 seconds.
The default setup is 5 seconds.
Window split: There are two options:1/4/8/9-window split mode.
Channel: Display all channel settings in current split mode.
1. Click Add to add channel settings.
2. Select a channel setting and then click delete, it is to delete current
channel setting.
3. Select a channel setting and then click move up/move down to move its
position.
Step 4 Click OK
Device goes back to Display interface.
Step 5 Click Save button.
4.2.1.4.3 Zero-channel encoding
It is to enable and set zero-channel encoding function so that you can view several video sources
at one channel on WEB.
Step 1 On the main menu, from Setting->Display,
Enter Display interface.
Step 2 Click zero-channel encoding Setup button,
Enter zero-encoding interface. See Figure 4-29.
Step 3 Set parameters.
Enable: This function is disabled by default. Check the box here to enable this
function so that you can control the zero-channel encoding function at the WEB.
Compression: System default setup is H.264. You can set according to device
capability.
