53
Resolution: The resolution value may vary due to different device capabilities.
Please select from the dropdown list.
Frame rate: System supports 1-25(30). The frame rate value may vary due to
different device capabilities. Please select from the dropdown list.
Bit Rate: System supports 640/768/896/1024. The bit rate value may vary due to
different device capabilities and frame rate setups. Please select from the dropdown
list.
Save: Click the Save button to save current setup. If this function is disabled, you
cannot operate zero-channel encoding function at the WEB, the video is black or
null even you operate when the function is disabled. After you enabled this function,
login the Web and you can select zero-channel encoding mode at the right corner of
the interface
. Select a mode; you can view the local preview
video.
Figure 4-29
Step 4 Set overlay information.
1. Click Overlay button,
Enter overlay interface. See Figure 4-30
2. Select Monitor after time/plate/GPS.
3. Click Setup.
4. Drag the title to the corresponding position and right click mouse to go back to
overlay interface.
5. Click Save button.
