RHINO MNVR Series, User Manual

Page: 64 / 206

55
 Stop bit: Select corresponding stop bits. Default value is 1.
 Parity: There are three options: odd/even/none. Default setup is none.
Step 4 Click Save button.
Note
Click Copy to copy current channel setup to other channel(s).
Figure 4-31
4.2.2.2 PTZ Control
After completing all the setting please click save button. Right click mouse and then click PTZ.
Please note you can only go to the PTZ control interface when you are in 1-window display
mode.
Click Pan/Tilt/Zoom, the interface is shown as below. See
X324H324H324H294H294H294H301H
Figure 4-32.
Here you can set the following items:
 Step: value ranges from 1 to 8.
 Zoom
 Focus

Iris
Please click icon and to adjust zoom, focus and iris.
The corresponding item is grey if current unit does not support this function.
Here is a sheet for you reference.
Name Function
key
function Shortcut
key Function
key function Shortcut
Key
Zoom Wide Far

Focus Near
│
 Far ►
│
Iris Close


Open

