![RHINO MNVR Series User Manual Download Page 58](http://html1.mh-extra.com/html/rhino/mnvr-series/mnvr-series_user-manual_1452615058.webp)
49
Enable/disable record channel. Please refer to chapter 4.1.6 Record control for detailed
information.
Remote
Please refer to chapter 4.1.5.2 Remote for detailed information.
Alarm Output
It is to set alarm output mode. Please refer to chapter 4.3.4.4 Alarm output.
Device Info
Please refer to chapter 4.4.2.2 Device info for detailed information.
Zero-channel encoding
Click to go to zero-channel encoding interface. Please refer to chapter 4.2.1.4.3 Zero-channel
encoding for detailed information.
Main Menu
Click to go to the main menu.
Note
Right click mouse to go back to the upper-level menu.
4.2.1.4 Preview Settings
It is to set channel output mode, tour mode and zero-channel encoding mode.
4.2.1.4.1 Display
It is to set channel output mode such as transparent, channel name, overlay information, motion
tour and alarm tour mode, split mode, and volume during preview and bidirectional talk process.
Step 1 On the main menu, from Setting->Display,
Enter display interface. See Figure 4-27.
Step 2 Set parameters.
Transparency: Here is for you to adjust transparency. The value ranges from 128 to
255.
Channel name: Here is for you to set camera channel name.
In Figure 4-27, click modify button after channel. You can see an interface shown as
in Figure 4-26. Please note all your modification here applies to local end only. You
need to refresh web or client-end to get the latest channel name. System max
support 25-digital character.