60
connected peripheral device supports this function. Select wiper from the dropdown list
and click On to turn the wiper on and click Off to turn the wiper off.
It is to use RS485 command to control the peripheral device heater module on/off. Make
sure the connected peripheral device supports this function. Select defrost (clear fog) from
the dropdown list and click On to turn the heater on and click Off to turn the heater off.
Aux number: Input auxiliary number and then click On to start the auxiliary function. Click Off
to stop auxiliary function.
PONE: Check the box, device can go to the specified preset once it starts up.
POFE: Check the box, device can go to the specified preset before it shuts down.
Figure 4-43
4.2.3
Search & Playback
Click Search button in the main menu, or on the preview interface, right click mouse and then
select Search, search interface is shown as below. See Figure 4-44.
Note
Slight difference may be found on the user interface.
