background image

 

Manual CE (SAGOMA_GB)  

Sezione 2 

Part 2. Introduction 

We congratulate you on your choice of a M.P.R. automatic vending machine. This product has 
been designed by experts and it has been manufactured according to the high quality standards, 
which have always been a characteristic of all M.P.R. products. This instruction manual will help 
you to acquire a better knowledge of your machine. We recommend you to read it with the 
maximum attention and to follow the advice given in the text. 
 

The present manual includes all information and instructions for loading and cleaning 
operations of the vending machine, as well as instructions reserved to technical personnel 
for performing maintenance operations of more complex nature. This is the reason why the 
manual pages are clearly identifiable with relation to the technical preparation of the user to 
whom they are destined

 

Text with grey background

: for any person having access to the interior of the vending machine. 

These pages consist of an introduction, sections of general interest and sections concerning 
loading and routine cleaning. 

 
Text with normal background

:

 

these are for use by qualified technical personnel only. They 

include all operations related to installation, adjustment, and extra ordinary cleaning and 
general maintenance. 

 
All information contained in this manual are aimed to obtain from the machine the best 
performance within the limits of use set by the manufacturer. 
 
This Manual is integral to the equipment and must be available inside the machine until final 
deplacement. Inside the rear door of the machine there is a suit0able pocket where the Manual 
should be kept. 
 
In the event of loss or damaging of the Manual, to obtain an extra copy it will be necessary to 
supply to the manufacturer all the identification data appearing on the identification sticker. 
In compliance with the Company's endeavour to adopt technical improvements whenever possible, 
M.P.R. reserves the right to ameliorate future production (and the contents of future Manuals) 
without prior notice and without any obligation of updating the products on the market. 
 
The Technical service department of M.P.R. is at your disposal for any further information. Just call 
or send a fax at the following numbers: 

 +39.02.966551 

   +39.02.9655086 

or surf our web site 

www.rheavendors.com

 

or send en e-mail at the address

 

[email protected]

In order to speed up the response to your requests it will be necessary to supply: 
- All data appearing on the Serial Number Label (glued to the first page of this manual). 
- If the display of the machine is equipped with 2 buttons and led for sugar adjusting. 
 

CAUTION: M.P.R. is not liable for any damage that could affect, directly or indirectly, any 
person or property as a consequence of: 
- Incorrect use of the vending machine. 
- Incorrect installation. 
- Unsuitable electrical or water supply. 
- Major shortcomings in maintenance. 
- Technical interventions or alterations of unauthorised nature. 
- Adoption of non-original spare parts.

 

 
In the event of breakdown, M.P.R. has got no obligation whatsoever neither to compensate any 
economical damage deriving from the inactivity of the machine nor too extend the warranty period. 

5/5 

Summary of Contents for SAGOMA






























































Reviews: