C O M M A N D S
EDID Commands
350-8794 V1.1
Linx DVI 8x8 Matix Switcher User’s Guide
39
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E D I D C O M M A N D S
See
EDID Control
in
Chapter 1
for details.
Table 4-5
EDID Commands
Command
Arguments
Description
EDIDM
ode
<input # | ALL>
<FIXED | DYNAMIC>
Sets the EDID mode for one or all inputs to
FIXED or DYNAMIC. In fixed mode, EDID
parameters are user defined regardless of output
routing.
Example
: To set the mode to DYNAMIC for all
inputs, type:
edidm all dynamic
and press
ENTER
.
To display the current setting, do not enter a
mode.
DISPLAYMODE
<output # | ALL>
<EMULATed |
PASSthrough>
Sets the display ID that is reported when the
EDIDMODE is set to DYNAMIC. EMULATED
uses the EDID list entry specified with the
LoaDEmulateEDID
command. PASSthrough
provides EDID from the display connected to the
specified output.
Example
: To set the display mode to
PASSthrough for output 4, type:
displaymode 4 pass
and press
ENTER
.
To display the current setting, do not enter a
mode.
EDIDPR
iority
<input # | ALL>
<MINRES | OUTNUM>
In DYNAMIC mode with an input routed to
multiple outputs, this command sets minimum
resolution or output number as the criteria for
selecting the EDID to be used. When the priority
is set to MINRES, the EDID information
associated with the lowest resolution output
used will be reported. When the priority is set to
OUTNUM, the lowest number output EDID
information is reported.
Example
: To report EDID information from the
lowest resolution output for all inputs, type:
edidpri all minres
and type
ENTER
.
To display the current setting, enter the output
number or all only.
