C O M M A N D S
Preset Commands
350-8794 V1.1
Linx DVI 8x8 Matix Switcher User’s Guide
38
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P R E S E T C O M M A N D S
Table 4-4
Preset Commands
DEL
ete
P
re
S
e
T
<preset #>
Deleting a preset clears it of any input/output
assignments and removes the name if one has
been entered. A prompt to confirm the delete is
displayed.
Example
: To clear preset 90, type:
delpst 90
and press
ENTER
.
SH
o
WP
re
S
e
T
<preset #>
Enter the number of the desired preset to display
its name, if entered, and all input/output settings.
L
i
S
t
P
re
S
e
T
<preset #>
<preset # | ALL>
Lists preset names in specified range or all
presets.
Example
: To list presets 10 through 20, type:
l
spst 10 20
and press
ENTER
.
NAMEPreSeT
<preset #>
<preset name>
For a preset name, enter a maximum of 23
alphanumeric characters; spaces may be used.
Example
: To name preset 11 “Training”, type:
namepst 11 Training
and press
ENTER
.
Without a preset name, this command returns
the current name of the preset number entered.
RECALLP
re
S
e
T
<preset #>
Enter the desired preset number to load
input/output assignments.
Example
: To load preset 15, type:
recallpst 15
and press
ENTER
.
S
a
V
e
P
re
S
e
T
<preset #>
[input #,output #]
Enter only a preset number to save the current
input/output configuration. Enter a single input
number and output number to save to the
selected preset; other existing input/output
assignments are not modified. Input and output
numbers must be separated by a comma.
Example
: To save the current routing to preset
12, type:
presetsave 15
and press
ENTER
.
Example
: To assign input 1 to output 6 in preset
10, type:
svpst 10 1,6
and press
ENTER
.
