C O M M U N I C A T I O N S S E T U P
Ethernet Control
350-8794 V1.1
Linx DVI 8x8 Matix Switcher User’s Guide
12
. . . . .
S
Example
: If the
Linx DVI 8x8 Matrix Switcher
’s IP address has
not been changed from its default value, type:
telnet 192.168.1.200 8000
... and press
ENTER
.
5.
At the Password prompt type:
RGB
... and press ENTER. The password must be entered in upper
case.
At this point, the Telnet window starts and the
Linx DVI 8x8
Matrix Switcher
responds with the product name and copyright
notice as shown in the figure below.
Figure 2-8
Telnet Connected
To change the
Linx Switcher
IP address, see the following section.
Note
To close a Telnet session, type
EXIT
and press
ENTER
.
