DSPbR EDGE
Series User’s Manual
Asia Pacific | EMEA | Americas
35
10.16 Configuration
– Communications
COMMUNICATIONS CONFIGURATION
The unit’s Ethernet port and Cellular Modem settings are configured on this page.
The Ethernet port parameters apply to the externally-accessible Ethernet port located on the base plate on the housing.
Ethernet Settings
DHCP:
If enabled, the repeater will attempt to get its network settings from a DHCP server. The default is Enabled not to be ticked (i.e.
‘Disabled’).
IP Address:
IP address in IPv4 format (i.e. aaa.bbb.ccc.ddd).
Subnet Mask:
IP address in IPv4 format (i.e. aaa.bbb.ccc.ddd).
Gateway:
IP address in IPv4 format (i.e. aaa.bbb.ccc.ddd).
There is a second Ethernet port inside the unit, on the front of the SCM mo
dule. This port’s address is fixed as:
Address:192.168.1.200
Subnet:255.255.255.0
Gateway:192.168.1.254
