DSPbR EDGE
Series User’s Manual
Asia Pacific | EMEA | Americas
23
Trunking Extender Status
(Network ‘Donor’ side and EDGE rebroadcast ‘Extender’ sides)
WACN ID:
Displays the WACN (Wide Area Communications Network) ID for the network. One or more systems may be joined into a network
of systems. The WACN identifies the network. The WACN ID combined with the System ID will uniquely identify a system.
Note:
The WACN ID should always be the same for both the Donor and Extender fields.
System ID:
Displays the System ID for the system. One or more systems may be joined into a network of systems. The System ID identifies
one of those systems within the network. The WACN ID combined with the System ID will uniquely identify a system.
NAC Code:
The Network Access Code (NAC) in P25 similar to CTCSS or DCS for analogue radios. The correct NAC code must be configured
to ensure radios in the rebroadcast area will unsquelch on valid signals.
Note:
This field will display
‘0’ if the Trunking Extender is not receiving a valid control channel off-air, despite the value shown in
this field on the Configuration/Trunking Extender GUI page.
Note:
The NAC Code should always be the same for both the Donor and Extender fields.
RFSS ID:
In addition to the WACN ID and System ID, a radio site will also broadcast its Radio Frequency Sub-System ID, or RFSS Identity.
Along with the Site ID, the RFSS ID uniquely identifies every site within a system or network.
Site ID:
The Site ID identifies a single trunked site. The combination of RFSS and Site ID uniquely identify a trunked site within a system or
network.
Default Band Plan:
T
he selected Band Plan for the Trunking Extender’s operation. Both a Donor (off-air) and Service (rebroadcast) band plan must be
configured.
Primary Control Channel
Displays the nominated Primary Control Channel (PCC) for both the Donor (off-air) and Service (rebroadcast) sides of the Trunking
Extender. The channel’s nominated Band Plan, Channel No. and Tx/Rx Frequencies are displayed.
Secondary Control Channel
Displays the nominated Secondary Control Channel (SCC) for both the Donor (off-air) and Service (rebroadcast) sides of the
Trunking Extender. The channel’s nominated Band Plan, Channel No. and Tx/Rx Frequencies are displayed.
Traffic Channels
Displays the nominated Traffic Channels (TC) for both the Donor (off-air) and Service (rebroadcast) sides of the Trunking Extender.
The channel’s nominated Band Plan, Channel No. and Tx/Rx Frequencies are displayed.