DSPbR EDGE
Series User’s Manual
Asia Pacific | EMEA | Americas
32
Channels Configuration
Channel:
Individual channels can be enabled/disabled by selecting their respective tick box.
Channel Name:
A Channel Name can be entered to identify each channel if desired.
Trunking Extender (visible if option fitted)
Type:
Selects each channel's type; Standard (or non-trunking), Primary or Secondary Control Channel, or Traffic channel.
Donor Band Plan:
Selects the
Donor site’s Band Plan for each channel.
Donor Channel Number:
Displays the selected Donor Band Plan’s channel number based on the Donor In frequency entered further down the page.
Extender Band Plan:
Selects the
unit’s rebroadcast Band Plan for each channel.
Extender Channel Number:
Displays the selected Extender Band Plan’s channel number based on the Service Out frequency entered further down the page.
Downlink and Uplink
Donor In and Service In (MHz):
Sets the off-air RX frequency (in MHz) for each channel.
Service Out and Donor Out (MHz):
Sets the output TX frequency (in MHz) for each channel.
Gating (dBm):
Sets the RX gating threshold value for each channel.
Filter:
Selects the channel filter mask selected for each channel.
Delay:
Sets a value that adds delay to th
e passing of RF signals by the channel’s selected Filter group delay. This value can be entered to
synchronise the output signals of multiple EDGE units (i.e. simulcasting).
TX Limit (dBm):
The configured TX RF output power for each channel.
The contents of the page are described in the Help screen.
