DSPbR EDGE
Series User’s Manual
Asia Pacific | EMEA | Americas
27
10.11 Status
– Communications
COMMUNICATIONS
The unit’s Ethernet port and Cellular Modem configurations are displayed on this page.
These settings are configured on the Configuration/Communications page.
Ethernet
The Ethernet port parameters apply to the externally-accessible Ethernet port located on the base plate on the housing.
There is also a second Ethernet port inside the unit, on the front of the SCM module.
This port’s address is fixed as:
Address:192.168.1.200
Subnet:255.255.255.0
Gateway:192.168.1.254
(Cellular) Modem Settings
Modem Enable:
If enabled
, the repeater’s cellular modem is available for use.
Data Enable:
If enabled
, the repeater’s cellular modem will provide remote access to the unit’s GUI for remote configuration.
APN:
An Access Point Name (APN) is the name of a gateway between a mobile network and another computer network, frequently the
public Internet. Your cellular provider will provide their APN that should be entered in this field.
The contents of the page are described in the Help screen.
