11
Salt Amount
Salt Amount is the next value displayed. The default
value for Salt Amount is 6 pounds (2.7 kilograms) of
salt; refer to Table 2.2 for suggested salt settings.
Note:
This is the total amount of salt used for a
regeneration, not pounds per cubic foot. If 6 pounds is
not acceptable, press the
SET
button and change the
numbers. If 6 pounds is acceptable, press the
DOWN
ARROW
(
↓
) button.
Capacity
Capacity is the next value displayed and is expressed
in kilograins (kilograms). Refer to Table 2.2 for the
capacity setting that corresponds to the resin bed
volume and salt amount. The default value is 0. Press
the
SET
button and enter a new value. Any value
between 1 and 2600 kilograins (.1 and 260.0 kilograms)
is allowed.
Table 2.1 - Level I Programming Performa Cv 962 Parallel Multi Tank or Single Tank Softener
Parameter
Range of Values
Minimum
Increments
Factory
Value
Units of
Measure
Notes
Name
Description
P1
Time of Week
and Time of day
(1-7)
1:00 to 12:59
AM or PM Metric
(1-7)
00:00 to 23:59
(1 day)
1 minute
None
Hour:minute
Range depends on value
selected for P13.
For day of week SUN=1,
MON=2, TUE=3, WED=4,
THU=5, FRI=6, SAT=7.
P2
Time of day to
start
regeneration
1:00 to 12:59
or PM
00:00 to 23:59
1
2:00 AM
Hour:minute
Range depends on value
selected for P13. Use only if
P15 = 0 or 1.
P3
Hardness of
water
3 to 250
30 to 2500
1
10
0
0
Grains/gallon
ppm
Unit of measure depends on
value selected for P12.
P4
Salt amount
0.5 to 125.0
0.2 to 50.0
0.5
0.2
6
2.6
Pounds
Kilograms
Select from Table 2.2 on
page 12.
P5
Capacity of unit
1 to 2600
0.1 to 260.0
1.0
0.1
0
Kilograins
Kilograms
Select from Table 2.2 on
page 12.
Reynolds Water Conditioning Co.
24545Hathaway
Farmington Hills, MI 48335
800-572-9575