manualshive.com logo in svg

Rexnord Falk Quadrive A Series, Owner'S Manual

Share
Download
Rexnord Falk Quadrive A Series Owner'S Manual Download Page 21

Rexnord 

378-206

3001 W. Canal St., Milwaukee, WI 53208-4200 USA 

January 2019

Telephone: 

414-342-3131

 Fax: 

414-937-4359

  www.rexnord.com 

Supersedes 07-15

(PN-212395)

Falk Quadrive Shaft-Mounted Drives Model A 

•

 Appendix

Sizes 5407-5608 

(Page 21 of 53)

TABLE OF CONTENTS

Appendix A:  Lubrication Recommendations .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 22

Appendix B:  Backstop Installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 30

Appendix C:  TA Removal Tool  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 34

Appendix D:  Motor Mount Installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 36

Appendix E:  Vertical Standpipe Installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 38

Appendix F:  Modifications for Non-Standard Mounting Positions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 40

Appendix G:  Retaining Rings for Bushing Nuts and Thrust Plates &

 

Tooth Combinations for Vibrations Analysis  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 42

Appendix H:  Drive Shaft Recommendations for Tapered Drive Shafts  .  .  .  .  .  .  .  .  .  .  .  .  .  . 43

Appendix J:  Drive Shaft Recommendations Using TA Taper Bushing  .  .  .  .  .  .  .  .  .  .  .  .  .  . 44

Appendix K:  Drive Shaft Recommendations Using (TCB) Kit  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 46

Appendix L:  V-Belt Guard Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 48

Appendix M:  Electric Fan Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 50

Appendix N:  Reliability Package  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 52

Summary of Contents for Falk Quadrive A Series






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands