Revolution 230404, User Manual

Page: 9 / 32

GB
9
Operating instructions
Attention
: Do not pop corn kernels in a dry pot (without oil).
• To avoid overheating, always have oil and kernels ready before
operating.
• Make sure the light bulb is installed
• Turn on the device using the POWER switch(7).
• Turn on the light using WARMING & Light switch(4).
• Pour 50ml oil into the kettle(10). Turn on the heater for ket-
tle(10) using HEAT switch(5) to preheat for 4-6 minutes.
• Lift the kettle lid using the lid grip(8) carefully and pour 50g
sugar(while the amount is dependent upon your taste) and
150g corn kernels.
• Put the lid down and close the glass door(2) firmly to avoid
spilling of popcorns from the appliance.
• Pay attention to the corn kernels while popping process to
avoid burning.
• Turn on the motor using TURN switch(6) to stir the corn ker-
nels until there are all popped, then pour the popcorns out
from the kettle to the chamber using kettle grip(9) carefully.
• The popping cycle is approx. 3 minutes per portion.
• Fix the kettle in horizontal position again and repeat upper
procedures to make more popcorns.
Note :
• The appliance is equipped with “protective thermostat”. In
case of overheating of the kettle, the protection will be acti-
vated and turns the appliance off. Disconnect the appliance
from the electrical socket and wait for cooling down. Then, it
may be used again.
• Do not put too many corn kernels at one time for even spacing
and cooking.
• Do not drop any oil around the plate. Otherwise it will catch
fire when it is heated to a certain temperature.
• Warning : Do not add any water to the plate while it is popping!
Cleaning & Maintenance
ATTENTION!
Always disconnect the appliance from the elec-
trical mains and cool down before storage, cleaning & main-
tenance.
Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
Cleaning
• Never use abrasive sponges or aggressive detergents, steel
wool or metallic utensils to clean the heating area.
• Avoid the use of sprays as this may damage the heating area.
• Never immerse the appliance in water or any other liquid.
• This appliance should be cleaned regularly and any food de-
posit removed.
• Clean the surface of the heating area with a damp cloth (water
with mild detergent).
Storage
• Always make sure the appliance has already been disconnect-
ed from the electrical wall outlet and cooled down completely.
• Store the appliance in a cool and clean place.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problem Possible cause Possible solution
Light bulb
does not li-
ght on
1. Bulb is not connec-
ted firmly with the lamp
holder
1. Fasten the screw of
the bulb to the lamp hol-
der
2. Bulb is burnt out 2. Replace the light
bulb (E27, Max. 60 W)
Appliance
does not heat
up
1. Wire of heating ele-
ment is loosed
Contact your supplier
2. Heating element is
burnt out
3. The electrical compo-
nents are damaged
Too high or
too low tem-
perature
Abnormal thermostat
adjustment
Contact your supplier
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the product must not
be disposed of with other household waste. Instead, it is your
responsibility to dispose to your waste equipment by handing it
over to a designated collection point. Failure to follow this rule
may be penalized in accordance with applicable regulations on
waste disposal. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve nat-
ural resources and ensure that it is recycled in a manner that
protects human health and the environment.
For more information about where you can drop off your waste
for recycling, please contact your local waste collection compa-
ny. The manufacturers and importers do not take responsibility
for recycling, treatment and ecological disposal, either directly
or through a public system.