manualshive.com logo in svg

Retro Games THEC64, User Manual

Share
Download
Retro Games THEC64 User Manual Download Page 73

Computer configuration

Type:

 

X

Possible values:

64
vic
pal
ntsc
driveicon
readonly
accuratedisk
fullheight
noaudioscale

bank0
bank1
bank2
bank3
bank5
3k
4k
8k
16k
24k
32k
35k

This sets the parameters needed to configure the computer before it loads and runs 
the program.

The values are case sensitive and must be in lower case.

64

 – Specifies a C64 computer model.

vic

 – Specifies a VIC 20 computer model.

pal

 – This makes the program behave as though running on a European (PAL) 

computer. It doesn’t affect the HDMI output of THEC64.

ntsc

 – This makes the program behave as though running on a North American 

(NTSC) computer. It doesn’t affect the HDMI output of THEC64.

driveicon

 – This activates the on-screen drive icon, to show when a disk is accessed.

readonly

 – This makes a disk read-only, meaning THEC64 cannot write back to the 

virtual disk.

accuratedisk

 – This switches ON accurate (slower) disk drive functionality, 

necessary for some programs to load correctly from a d64 or g64 file. This is off by 
default.

63

Summary of Contents for THEC64



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands