PART VI HOW TO REPLACE THE PARTS
6-18
ENGLISH
6.13 REPLACE THE SPEAKER
When you try to replace speaker, you can proceed with
the following steps.
- Stop the operation and unplug the power plug from the
electrical outlet.
- Remove the unit left side handle below the plastic control
panel cover.
- Pull out the speaker.
- Remove the wire from speaker using a soldering iron.
- Replace a new speaker and solder the wires to the
speaker.
-Install the unit handle.
1. Gently, lift up the corner of the handle with the flat head screwdriver.
2. Pull out the handle.
3. Take out the speaker from the
handle hole.
4. Remove the wires from the
speaker with soldering iron.
5. Attach the wires to the new
speaker with soldering iron.
Flat head
screwdriver
Nut
screwdriver
Required tools
Soldering iron
For new units, the speaker is secured to
the side of the unit casing with a nut, you
will need to open the unit upper cover and
fan motor front plate to find the speaker.
You can follow
Step1
of
6.7 REPLACE
THE FAN MOTOR
.
Summary of Contents for R200T
Page 69: ...ENGLISH NOTES ...
