ENGLISH
In order to fix the problems listed, you need to
prepare the following necessary tools. All tools
can be purchased at Canadian Tire.
To reduce risk of electric shock, it is extremely important to stop the operation and
unplug the power cord before checking the unit or replacing any parts. In order to fix
the some problems, you will need to open the bottom plate. When you open the
bottom plate, remember to discharge the unit power contact terminals by creating a
short circuit before you touching them. If not, an electrical shock may occur.
1
8
9
10
11
12
13
2
3
4
5
6
7
1-Flat head screwdriver
2-Phillips screwdriver
3-Nut screwdriver (M3)
4-Needle-nose pliers
5-Wire cutter
6-Ohmmeter
7-High voltage probe
8-Nut wrench
9-Hot glue gun
10-Hammer drill
11-Rivet gun
12-Soldering iron
13-Wire ties
REQUIRED TOOLS AND OPEN THE BOTTOM PLATE
3. Create a short circuit between low
voltage terminal and ground terminal
with screwdriver.
2. Create a short circuit
between high voltage
terminal and a screw on the
bottom with screwdriver.
WARNING
5-1A
1. Lay down the unit horizontally
with unit bottom led facing toward
you. Unscrew the 10 screws
located on the bottom of the unit
with Phillips screwdriver.
Summary of Contents for R200T
Page 69: ...ENGLISH NOTES ...
